Wondering how to frame your new artworks? Here’s my personal choice:
Pictured: Selsey RNLI Offshore Boathouse, West Sussex, South England
It’s an oak frame, stained black. The print is float-mounted so the viewer can enjoy the entire printed piece, which includes the edition number, my initials and chop (embossed logo) in the bottom right hand corner.
The paper size is 20×16 inches and you’ll see there’s a half inch space between the print and the frame.
The resulting total size including the frame is approximately 23.5 x 20 inches.
The key points:
20×16 inch paper size
The print is float-mounted
Half inch space between the print and the frame
Oak frame, stained black (dark brown stains will work well too)
Frame thickness approximately 1.25 inches across the front face
Frame depth approximately 1.25 inches
Total size approximately 23.5 x 20 inches
To cap it off, I specify Museum Glass so that:
the print is protected from being damaged over time by ultraviolet light rays
reflections in the glass are reduced to an absolute minimum
If you’ve just purchased a Limited Edition Print from these pages, feel free to show this page to your picture framer.
FRAMING — By prior arrangement only —
CONTACT JACK FIRST
OPTION 1: Standard Glass The print(s) of your choice framed as suggested above with standard picture glass
£80.00
Promotional codes NOT valid with this item
OPTION 2: Museum Glass The print(s) of your choice framed as suggested above with Museum Glass
£120.00
Promotional codes NOT valid with this item
NOTE: The latter option may be more expensive but it’s the perfect choice to accompany your new print(s). The artwork will be protected from damaging ultraviolet light rays and glass reflections are minimised to almost zero!